Process Flow

We, as a manufacturer, adopt the dry process for manufacturing of cement.

Our semi-automated plant operates at global standards and processes to match the quality aspired by our esteemed customers.

Brief Description Of
The Cement Manufacturing Process

1

Crushing Section:

The raw materials mainly limestone, additives etc. are crushed in the separate crushers and stored automatically into the respective silos.

2

Storage & Proportioning:

The different raw materials are extracted from the silos in the desired proportion through table feeders and conveyed to raw mill.

3

Raw Milling:

The raw mix is ground into a Ball Mill at desired fineness to produce Raw Meal, and transported for Homogenizing.

4

Blending & Homogenization:

The raw meal is homogenized in the blending silos, and is stored automatically into a storage silo for feeding to the kiln.

5

Palletizing & Burning

The raw meal is charged into the kiln for burning. The clinker after discharge is stored in the clinker yard through deep Bucket Elevator.

6

Clinker/gypsum crushing, storage & proportioning:

Clinker & Gypsum after crushing stored into the hoppers and extracted in the desired proportion with the help of table feeders and transported to the Cement mill Hopper.

7

Cement Milling

The clinker, Gypsum & Fly ash mix is ground in the cement mill to produce cement.

8

Storage & Packing

The cement is stored into the cement silos and aerated, tested and packed for dispatch.